|
Bosch CB740AB 7-1/4-Inch 40 Tooth ATB Finishing Saw Blade with 5/8-Inch and Diamond Knockout Arbor
|
MSRP: $25.62
Your Price: $20.49
Savings: $ 5.13 ( 20% )
Shipping: Usually ships in 24 hours
Manufacturer: Bosch
Prices subject to change. Please verify price during checkout.
|
|
Bosch CB740AB 7-1/4-Inch 40 Tooth ATB Finishing Saw Blade with 5/8-Inch and Diamond Knockout Arbor Features
|
Patented C-3 Dyanite® carbide teeth are diamond ground to be precision sharp from the start and stay sharp up to 6X longer than standard carbide
Impact resistant tri-metal shims between each carbide tip and the blade act as shock absorbers in tough applications
A fully hardened thin kerf plate means less material is removed which allows for a faster cut while still remaining straight and true
Expansion slots reduce blade warping
|
|
|
|
|
|
|
|
|
Additional Bosch CB740AB 7-1/4-Inch 40 Tooth ATB Finishing Saw Blade with 5/8-Inch and Diamond Knockout Arbor Information
|
Bosch's Construction Series carbide blades have been designed to fit the needs of all framing and trim carpenters. Each blade has a thin-plate that has been hardened to stay flat and run true, cut after cut.
|
|
|
What Customers Say About Bosch CB740AB 7-1/4-Inch 40 Tooth ATB Finishing Saw Blade with 5/8-Inch and Diamond Knockout Arbor:
|
|
Cutting plywood yields the same results. The blade entry side finishes perfectly with no chipping, and the blade exit side has mimimal chipping. I wrote a question to their e-mail address, and someone called me to discuss my application in detail to make sure that the blade they recommended would meet my needs. I bought this blade upon recommendation from Bosch to cut melamine coated particle board. It works great for this application. By the way, the Vermont American/Bosch technical support was outstanding.
|
|
 |
|
|
